Home » AddTransient, AddScoped and AddSingleton Services Differences

AddTransient, AddScoped and AddSingleton Services Differences

Solutons:


TL;DR

Transient objects are always different; a new instance is provided to
every controller and every service.

Scoped objects are the same within a request, but different across
different requests.

Singleton objects are the same for every object and every request.

For more clarification, this example from .NET documentation shows the difference:

To demonstrate the difference between these lifetime and registration options, consider a simple interface that represents one or more tasks as an operation with a unique identifier, OperationId. Depending on how we configure the lifetime for this service, the container will provide either the same or different instances of the service to the requesting class. To make it clear which lifetime is being requested, we will create one type per lifetime option:

using System;

namespace DependencyInjectionSample.Interfaces
{
    public interface IOperation
    {
        Guid OperationId { get; }
    }

    public interface IOperationTransient : IOperation
    {
    }

    public interface IOperationScoped : IOperation
    {
    }

    public interface IOperationSingleton : IOperation
    {
    }

    public interface IOperationSingletonInstance : IOperation
    {
    }
}

We implement these interfaces using a single class, Operation, that accepts a GUID in its constructor, or uses a new GUID if none is provided:

using System;
using DependencyInjectionSample.Interfaces;
namespace DependencyInjectionSample.Classes
{
    public class Operation : IOperationTransient, IOperationScoped, IOperationSingleton, IOperationSingletonInstance
    {
        Guid _guid;
        public Operation() : this(Guid.NewGuid())
        {

        }

        public Operation(Guid guid)
        {
            _guid = guid;
        }

        public Guid OperationId => _guid;
    }
}

Next, in ConfigureServices, each type is added to the container according to its named lifetime:

services.AddTransient<IOperationTransient, Operation>();
services.AddScoped<IOperationScoped, Operation>();
services.AddSingleton<IOperationSingleton, Operation>();
services.AddSingleton<IOperationSingletonInstance>(new Operation(Guid.Empty));
services.AddTransient<OperationService, OperationService>();

Note that the IOperationSingletonInstance service is using a specific instance with a known ID of Guid.Empty, so it will be clear when this type is in use. We have also registered an OperationService that depends on each of the other Operation types, so that it will be clear within a request whether this service is getting the same instance as the controller, or a new one, for each operation type. All this service does is expose its dependencies as properties, so they can be displayed in the view.

using DependencyInjectionSample.Interfaces;

namespace DependencyInjectionSample.Services
{
    public class OperationService
    {
        public IOperationTransient TransientOperation { get; }
        public IOperationScoped ScopedOperation { get; }
        public IOperationSingleton SingletonOperation { get; }
        public IOperationSingletonInstance SingletonInstanceOperation { get; }

        public OperationService(IOperationTransient transientOperation,
            IOperationScoped scopedOperation,
            IOperationSingleton singletonOperation,
            IOperationSingletonInstance instanceOperation)
        {
            TransientOperation = transientOperation;
            ScopedOperation = scopedOperation;
            SingletonOperation = singletonOperation;
            SingletonInstanceOperation = instanceOperation;
        }
    }
}

To demonstrate the object lifetimes within and between separate individual requests to the application, the sample includes an OperationsController that requests each kind of IOperation type as well as an OperationService. The Index action then displays all of the controller’s and service’s OperationId values.

using DependencyInjectionSample.Interfaces;
using DependencyInjectionSample.Services;
using Microsoft.AspNetCore.Mvc;

namespace DependencyInjectionSample.Controllers
{
    public class OperationsController : Controller
    {
        private readonly OperationService _operationService;
        private readonly IOperationTransient _transientOperation;
        private readonly IOperationScoped _scopedOperation;
        private readonly IOperationSingleton _singletonOperation;
        private readonly IOperationSingletonInstance _singletonInstanceOperation;

        public OperationsController(OperationService operationService,
            IOperationTransient transientOperation,
            IOperationScoped scopedOperation,
            IOperationSingleton singletonOperation,
            IOperationSingletonInstance singletonInstanceOperation)
        {
            _operationService = operationService;
            _transientOperation = transientOperation;
            _scopedOperation = scopedOperation;
            _singletonOperation = singletonOperation;
            _singletonInstanceOperation = singletonInstanceOperation;
        }

        public IActionResult Index()
        {
            // ViewBag contains controller-requested services
            ViewBag.Transient = _transientOperation;
            ViewBag.Scoped = _scopedOperation;
            ViewBag.Singleton = _singletonOperation;
            ViewBag.SingletonInstance = _singletonInstanceOperation;

            // Operation service has its own requested services
            ViewBag.Service = _operationService;
            return View();
        }
    }
}

Now two separate requests are made to this controller action:

First Request

Second Request

Observe which of the OperationId values varies within a request, and between requests.

  • Transient objects are always different; a new instance is provided to every controller and every service.

  • Scoped objects are the same within a request, but different across different requests

  • Singleton objects are the same for every object and every request (regardless of whether an instance is provided in ConfigureServices)

In .NET’s dependency injection there are three major lifetimes:

Singleton which creates a single instance throughout the application. It creates the instance for the first time and reuses the same object in the all calls.

Scoped lifetime services are created once per request within the scope. It is equivalent to a singleton in the current scope. For example, in MVC it creates one instance for each HTTP request, but it uses the same instance in the other calls within the same web request.

Transient lifetime services are created each time they are requested. This lifetime works best for lightweight, stateless services.

Here you can find and examples to see the difference:

ASP.NET 5 MVC6 Dependency Injection in 6 Steps (web archive link due to dead link)

Your Dependency Injection ready ASP.NET : ASP.NET 5

And this is the link to the official documentation:

Dependency injection in ASP.NET Core

Which one to use

Transient

  • since they are created every time they will use more memory & Resources and can have the negative impact on performance
  • use this for the lightweight service with little or no state.

Scoped

  • better option when you want to maintain state within a request.

Singleton

  • memory leaks in these services will build up over time.
  • also memory efficient as they are created once reused everywhere.

Use Singletons where you need to maintain application wide state. Application configuration or parameters, Logging Service, caching of data is some of the examples where you can use singletons.

Injecting service with different lifetimes into another

  1. Never inject Scoped & Transient services into Singleton service. ( This effectively converts the transient or scoped service into the singleton.)

  2. Never inject Transient services into scoped service ( This converts the transient service into the scoped.)

Related Solutions

Extract file from docker image?

You can extract files from an image with the following commands: docker create $image # returns container ID docker cp $container_id:$source_path $destination_path docker rm $container_id According to the docker create documentation, this doesn't run the...

Transfer files using scp: permission denied

Your commands are trying to put the new Document to the root (/) of your machine. What you want to do is to transfer them to your home directory (since you have no permissions to write to /). If path to your home is something like /home/erez try the following:...

What’s the purpose of DH Parameters?

What exactly is the purpose of these DH Parameters? These parameters define how OpenSSL performs the Diffie-Hellman (DH) key-exchange. As you stated correctly they include a field prime p and a generator g. The purpose of the availability to customize these...

How to rsync multiple source folders

You can pass multiple source arguments. rsync -a /etc/fstab /home/user/download bkp This creates bkp/fstab and bkp/download, like the separate commands you gave. It may be desirable to preserve the source structure instead. To do this, use / as the source and...

Benefits of Structured Logging vs basic logging

There are two fundamental advances with the structured approach that can't be emulated using text logs without (sometimes extreme levels of) additional effort. Event Types When you write two events with log4net like: log.Debug("Disk quota {0} exceeded by user...

Interfaces vs Types in TypeScript

2019 Update The current answers and the official documentation are outdated. And for those new to TypeScript, the terminology used isn't clear without examples. Below is a list of up-to-date differences. 1. Objects / Functions Both can be used to describe the...

Get total as you type with added column (append) using jQuery

One issue if that the newly-added column id's are missing the id number. If you look at the id, it only shows "price-", when it should probably be "price-2-1", since the original ones are "price-1", and the original ones should probably be something like...

Determining if a file is a hard link or symbolic link?

Jim's answer explains how to test for a symlink: by using test's -L test. But testing for a "hard link" is, well, strictly speaking not what you want. Hard links work because of how Unix handles files: each file is represented by a single inode. Then a single...

How to restrict a Google search to results of a specific language?

You can do that using the advanced search options: http://www.googleguide.com/sharpening_queries.html I also found this, which might work for you: http://www.searchenginejournal.com/how-to-see-google-search-results-for-other-locations/25203/ Just wanted to add...

Random map generation

Among the many other related questions on the site, there's an often linked article for map generation: Polygonal Map Generation for Games you can glean some good strategies from that article, but it can't really be used as is. While not a tutorial, there's an...

How to prettyprint a JSON file?

The json module already implements some basic pretty printing in the dump and dumps functions, with the indent parameter that specifies how many spaces to indent by: >>> import json >>> >>> your_json = '["foo", {"bar":["baz", null,...

How can I avoid the battery charging when connected via USB?

I have an Android 4.0.3 phone without root access so can't test any of this but let me point you to /sys/class/power_supply/battery/ which gives some info/control over charging issues. In particular there is charging_enabled which gives the current state (0 not...

How to transform given dataset in python? [closed]

From your expected result, it appears that each "group" is based on contiguous id values. For this, you can use the compare-cumsum-groupby pattern, and then use agg to get the min and max values. # Sample data. df = pd.DataFrame( {'id': [1, 2, 2, 2, 2, 2, 1, 1,...

Output of the following C++ Program [closed]

It works exactly like this non-recursive translation: int func_0() { return 2; } int func_1() { return 3; } int func_2() { return func_1() + func_0(); } // Returns 3 + 2 = 5 int func_3() { return func_2() + func_1(); } // Returns 5 + 3 = 8 int func_4() { return...

Making a circle out of . (periods) [closed]

Here's the maths and even an example program in C: http://pixwiki.bafsoft.com/mags/5/articles/circle/sincos.htm (link no longer exists). And position: absolute, left and top will let you draw: http://www.w3.org/TR/CSS2/visuren.html#choose-position Any further...

Should I use a code converter (Python to C++)?

Generally it's an awful way to write code, and does not guarantee that it will be any faster. Things which are simple and fast in one language can be complex and slow in another. You're better off either learning how to write fast Python code or learning C++...

tkinter: cannot concatenate ‘str’ and ‘float’ objects

This one line is more than enough to cause the problem: text="რეგულარი >> "+2.23+ 'GEL' 2.23 is a floating-point value; 'GEL' is a string. What does it mean to add an arithmetic value and a string of letters? If you want the string label 'რეგულარი...