Home » What does the Broken pipe message mean in an SSH session?

What does the Broken pipe message mean in an SSH session?

Solutons:


It’s possible that your server closes connections that are idle for too long.
You can update either your client (ServerAliveInterval) or your server (ClientAliveInterval)

 ServerAliveInterval
         Sets a timeout interval in seconds after which if no data has
         been received from the server, ssh(1) will send a message through
         the encrypted channel to request a response from the server.  The
         default is 0, indicating that these messages will not be sent to
         the server.  This option applies to protocol version 2 only.

 ClientAliveInterval
         Sets a timeout interval in seconds after which if no data has
         been received from the client, sshd(8) will send a message
         through the encrypted channel to request a response from the
         client.  The default is 0, indicating that these messages will
         not be sent to the client.  This option applies to protocol
         version 2 only.

To update your server (and restart your sshd)

echo "ClientAliveInterval 60" | sudo tee -a /etc/ssh/sshd_config

Or client-side:

echo "ServerAliveInterval 60" >> ~/.ssh/config 

If you want to have a longer connection period, in the client add:

echo 'ServerAliveInterval 30' | tee -a ~/.ssh/config
echo 'ServerAliveCountMax 1200' | tee -a ~/.ssh/config

ServerAliveCountMax by default this is set to 3. Therefore once the ServerAliveInterval has sent 3 small packs of info to your server it will then automatically log out. Setting it to 1200 means this process will have to occur at least 1200 times. In short you should be connected at least 30*1200 seconds (10 hours).

An alternative solution would be to use mosh – the mobile shell. In contrast to ssh it connects via UDP and supports roaming. You can start your session at home, suspend your laptop, take it to work / friends / wherever else you have internet, unsuspend your laptop and continue to work as if nothing has happened. It is especially useful if you are on a lousy internet connection: It shows instant feedback if your keystrokes don’t reach the server and continuously tries to reestablish the connection.

Installation and setup are simple: It is now included in all current Linux (plus a few non-Linux) distributions and it coordinates the session initialization and authentication via a prior ssh connection. So if you are able to connect via ssh user@server you are very likely to be able to connect with mosh just by calling mosh user@server, if the mosh packages are installed on both ends.

The main reason for connection failures is that you have to reach the server on a UDP port (default range: 60000-61000) for mosh to work. So if the server is behind a firewall you are mostly out of luck if can’t punch holes in it yourself (security implications).

Related Solutions

Joining bash arguments into single string with spaces

[*] I believe that this does what you want. It will put all the arguments in one string, separated by spaces, with single quotes around all: str="'$*'" $* produces all the scripts arguments separated by the first character of $IFS which, by default, is a space....

AddTransient, AddScoped and AddSingleton Services Differences

TL;DR Transient objects are always different; a new instance is provided to every controller and every service. Scoped objects are the same within a request, but different across different requests. Singleton objects are the same for every object and every...

How to download package not install it with apt-get command?

Use --download-only: sudo apt-get install --download-only pppoe This will download pppoe and any dependencies you need, and place them in /var/cache/apt/archives. That way a subsequent apt-get install pppoe will be able to complete without any extra downloads....

What defines the maximum size for a command single argument?

Answers Definitely not a bug. The parameter which defines the maximum size for one argument is MAX_ARG_STRLEN. There is no documentation for this parameter other than the comments in binfmts.h: /* * These are the maximum length and maximum number of strings...

Bulk rename, change prefix

I'd say the simplest it to just use the rename command which is common on many Linux distributions. There are two common versions of this command so check its man page to find which one you have: ## rename from Perl (common in Debian systems -- Ubuntu, Mint,...

Output from ls has newlines but displays on a single line. Why?

When you pipe the output, ls acts differently. This fact is hidden away in the info documentation: If standard output is a terminal, the output is in columns (sorted vertically) and control characters are output as question marks; otherwise, the output is...

mv: Move file only if destination does not exist

mv -vn file1 file2. This command will do what you want. You can skip -v if you want. -v makes it verbose - mv will tell you that it moved file if it moves it(useful, since there is possibility that file will not be moved) -n moves only if file2 does not exist....

Is it possible to store and query JSON in SQLite?

SQLite 3.9 introduced a new extension (JSON1) that allows you to easily work with JSON data . Also, it introduced support for indexes on expressions, which (in my understanding) should allow you to define indexes on your JSON data as well. PostgreSQL has some...

Combining tail && journalctl

You could use: journalctl -u service-name -f -f, --follow Show only the most recent journal entries, and continuously print new entries as they are appended to the journal. Here I've added "service-name" to distinguish this answer from others; you substitute...

how can shellshock be exploited over SSH?

One example where this can be exploited is on servers with an authorized_keys forced command. When adding an entry to ~/.ssh/authorized_keys, you can prefix the line with command="foo" to force foo to be run any time that ssh public key is used. With this...

Why doesn’t the tilde (~) expand inside double quotes?

The reason, because inside double quotes, tilde ~ has no special meaning, it's treated as literal. POSIX defines Double-Quotes as: Enclosing characters in double-quotes ( "" ) shall preserve the literal value of all characters within the double-quotes, with the...

What is GNU Info for?

GNU Info was designed to offer documentation that was comprehensive, hyperlinked, and possible to output to multiple formats. Man pages were available, and they were great at providing printed output. However, they were designed such that each man page had a...

Set systemd service to execute after fstab mount

a CIFS network location is mounted via /etc/fstab to /mnt/ on boot-up. No, it is not. Get this right, and the rest falls into place naturally. The mount is handled by a (generated) systemd mount unit that will be named something like mnt-wibble.mount. You can...

Merge two video clips into one, placing them next to each other

To be honest, using the accepted answer resulted in a lot of dropped frames for me. However, using the hstack filter_complex produced perfectly fluid output: ffmpeg -i left.mp4 -i right.mp4 -filter_complex hstack output.mp4 ffmpeg -i input1.mp4 -i input2.mp4...

How portable are /dev/stdin, /dev/stdout and /dev/stderr?

It's been available on Linux back into its prehistory. It is not POSIX, although many actual shells (including AT&T ksh and bash) will simulate it if it's not present in the OS; note that this simulation only works at the shell level (i.e. redirection or...

How can I increase the number of inodes in an ext4 filesystem?

It seems that you have a lot more files than normal expectation. I don't know whether there is a solution to change the inode table size dynamically. I'm afraid that you need to back-up your data, and create new filesystem, and restore your data. To create new...

Why doesn’t cp have a progress bar like wget?

The tradition in unix tools is to display messages only if something goes wrong. I think this is both for design and practical reasons. The design is intended to make it obvious when something goes wrong: you get an error message, and it's not drowned in...