Home » What is a Superblock, Inode, Dentry and a File?

What is a Superblock, Inode, Dentry and a File?

Solutons:


First and foremost, and I realize that it was not one of the terms from your question, you must understand metadata. Succinctly, and stolen from Wikipedia, metadata is data about data. That is to say that metadata contains information about a piece of data. For example, if I own a car then I have a set of information about the car but which is not part of the car itself. Information such as the registration number, make, model, year of manufacture, insurance information, and so on. All of that information is collectively referred to as the metadata. In Linux and UNIX file systems metadata exists at multiple levels of organization as you will see.

The superblock is essentially file system metadata and defines the file system type, size, status, and information about other metadata structures (metadata of metadata). The superblock is very critical to the file system and therefore is stored in multiple redundant copies for each file system. The superblock is a very “high level” metadata structure for the file system. For example, if the superblock of a partition, /var, becomes corrupt then the file system in question (/var) cannot be mounted by the operating system. Commonly in this event, you need to run fsck which will automatically select an alternate, backup copy of the superblock and attempt to recover the file system. The backup copies themselves are stored in block groups spread through the file system with the first stored at a 1 block offset from the start of the partition. This is important in the event that a manual recovery is necessary. You may view information about ext2/ext3/ext4 superblock backups with the command dumpe2fs /dev/foo | grep -i superblock which is useful in the event of a manual recovery attempt. Let us suppose that the dumpe2fs command outputs the line Backup superblock at 163840, Group descriptors at 163841-163841. We can use this information, and additional knowledge about the file system structure, to attempt to use this superblock backup: /sbin/fsck.ext3 -b 163840 -B 1024 /dev/foo. Please note that I have assumed a block size of 1024 bytes for this example.

An inode exists in, or on, a file system and represents metadata about a file. For clarity, all objects in a Linux or UNIX system are files; actual files, directories, devices, and so on. Please note that, among the metadata contained in an inode, there is no file name as humans think of it, this will be important later. An inode contains essentially information about ownership (user, group), access mode (read, write, execute permissions), file type, and the data blocks with the file’s content.

A dentry is the glue that holds inodes and files together by relating inode numbers to file names. Dentries also play a role in directory caching which, ideally, keeps the most frequently used files on-hand for faster access. File system traversal is another aspect of the dentry as it maintains a relationship between directories and their files.

A file, in addition to being what humans typically think of when presented with the word, is really just a block of logically related arbitrary data. Comparatively very dull considering all of the work done (above) to keep track of them.

I fully realize that a few sentences do not provide a full explanation of any of these concepts so please feel free to ask for additional details when and where necessary.

File

A file just means a bunch of bytes arranged in a certain order. It’s what normal people call the contents of a file. When Linux opens a file, it also creates a file object, which holds data about where the file is stored and what processes are using it. The file object (but not the file data itself) is thrown away when the file is closed.

Inode

An inode (short for “index node”) is a bunch of attributes about a file that Linux stores. There is one inode for each file (though with some filesystems, Linux has to create its own inodes because the information is spread around the filesystem). The inode stores information like who owns the file, how big the file is, and who is allowed to open the file. Each inode also contains a number unique to the filesystem partition; it’s like a serial number for the file described by that inode.

Dentry

A dentry (short for “directory entry”) is what the Linux kernel uses to keep track of the hierarchy of files in directories. Each dentry maps an inode number to a file name and a parent directory.

Superblock

The superblock is a unique data structure in a filesystem (though multiple copies exist to guard against corruption). The superblock holds metadata about the filesystem, like which inode is the top-level directory and the type of filesystem used.

superblock, the index node (or inode), the directory entry (or dentry), and finally, the file object are part of virtual file system (VFS) or virtual filesystem switch. The purpose of a VFS is to allow client applications to access different types of concrete file systems in a uniform way.

Relationships of major objects in the VFS

enter image description here


An Inode is a data structure on a Unix / Linux file system. An inode stores meta data about a regular file, directory, or other file system object. Inode acts as a interface between files and data. An inode can refer to a file or a directory or a symbolic link to another object. It contains a unique number (the i-number), the file’s attributes, including name, date, size and read/write permissions, and a pointer to the file’s location. It is the counterpart to the FAT table in the DOS/Windows world.

Programs, services, texts, images, and so forth, are all files. Input and output devices, and generally all devices, are considered to be files, according to the system.

The superblock is the container for high-level metadata about a file system. The superblock is a structure that exists on disk (actually, multiple places on disk for redundancy) and also in memory. It provides the basis for dealing with the on-disk file system, as it defines the file system’s managing parameters (for example, total number of blocks, free blocks, root index node).

Dentry is interface between files and Inodes. Dentries also play a role in directory caching which, ideally, keeps the most frequently used files on-hand for faster access.

Source

Related Solutions

Joining bash arguments into single string with spaces

[*] I believe that this does what you want. It will put all the arguments in one string, separated by spaces, with single quotes around all: str="'$*'" $* produces all the scripts arguments separated by the first character of $IFS which, by default, is a space....

AddTransient, AddScoped and AddSingleton Services Differences

TL;DR Transient objects are always different; a new instance is provided to every controller and every service. Scoped objects are the same within a request, but different across different requests. Singleton objects are the same for every object and every...

How to download package not install it with apt-get command?

Use --download-only: sudo apt-get install --download-only pppoe This will download pppoe and any dependencies you need, and place them in /var/cache/apt/archives. That way a subsequent apt-get install pppoe will be able to complete without any extra downloads....

What defines the maximum size for a command single argument?

Answers Definitely not a bug. The parameter which defines the maximum size for one argument is MAX_ARG_STRLEN. There is no documentation for this parameter other than the comments in binfmts.h: /* * These are the maximum length and maximum number of strings...

Bulk rename, change prefix

I'd say the simplest it to just use the rename command which is common on many Linux distributions. There are two common versions of this command so check its man page to find which one you have: ## rename from Perl (common in Debian systems -- Ubuntu, Mint,...

Output from ls has newlines but displays on a single line. Why?

When you pipe the output, ls acts differently. This fact is hidden away in the info documentation: If standard output is a terminal, the output is in columns (sorted vertically) and control characters are output as question marks; otherwise, the output is...

mv: Move file only if destination does not exist

mv -vn file1 file2. This command will do what you want. You can skip -v if you want. -v makes it verbose - mv will tell you that it moved file if it moves it(useful, since there is possibility that file will not be moved) -n moves only if file2 does not exist....

Is it possible to store and query JSON in SQLite?

SQLite 3.9 introduced a new extension (JSON1) that allows you to easily work with JSON data . Also, it introduced support for indexes on expressions, which (in my understanding) should allow you to define indexes on your JSON data as well. PostgreSQL has some...

Combining tail && journalctl

You could use: journalctl -u service-name -f -f, --follow Show only the most recent journal entries, and continuously print new entries as they are appended to the journal. Here I've added "service-name" to distinguish this answer from others; you substitute...

how can shellshock be exploited over SSH?

One example where this can be exploited is on servers with an authorized_keys forced command. When adding an entry to ~/.ssh/authorized_keys, you can prefix the line with command="foo" to force foo to be run any time that ssh public key is used. With this...

Why doesn’t the tilde (~) expand inside double quotes?

The reason, because inside double quotes, tilde ~ has no special meaning, it's treated as literal. POSIX defines Double-Quotes as: Enclosing characters in double-quotes ( "" ) shall preserve the literal value of all characters within the double-quotes, with the...

What is GNU Info for?

GNU Info was designed to offer documentation that was comprehensive, hyperlinked, and possible to output to multiple formats. Man pages were available, and they were great at providing printed output. However, they were designed such that each man page had a...

Set systemd service to execute after fstab mount

a CIFS network location is mounted via /etc/fstab to /mnt/ on boot-up. No, it is not. Get this right, and the rest falls into place naturally. The mount is handled by a (generated) systemd mount unit that will be named something like mnt-wibble.mount. You can...

Merge two video clips into one, placing them next to each other

To be honest, using the accepted answer resulted in a lot of dropped frames for me. However, using the hstack filter_complex produced perfectly fluid output: ffmpeg -i left.mp4 -i right.mp4 -filter_complex hstack output.mp4 ffmpeg -i input1.mp4 -i input2.mp4...

How portable are /dev/stdin, /dev/stdout and /dev/stderr?

It's been available on Linux back into its prehistory. It is not POSIX, although many actual shells (including AT&T ksh and bash) will simulate it if it's not present in the OS; note that this simulation only works at the shell level (i.e. redirection or...

How can I increase the number of inodes in an ext4 filesystem?

It seems that you have a lot more files than normal expectation. I don't know whether there is a solution to change the inode table size dynamically. I'm afraid that you need to back-up your data, and create new filesystem, and restore your data. To create new...

Why doesn’t cp have a progress bar like wget?

The tradition in unix tools is to display messages only if something goes wrong. I think this is both for design and practical reasons. The design is intended to make it obvious when something goes wrong: you get an error message, and it's not drowned in...