Home » Why has Raspbian apparently been renamed into “Raspberry Pi OS”?

Why has Raspbian apparently been renamed into “Raspberry Pi OS”?

Solutons:


First some background:

The original Pi fell uncomfortably between two stools hardware wise. A debian “armel” userland (with a Pi specific kernel) could run on the Pi but was far from taking advantage of it. Debian “armhf” wouldn’t run because it’s minimum CPU requirements were too high. To get around this Mike and I formed the Raspbian project and set about re-building all of Debian and I have been maintaining Raspbian since.

While we did produce one or two complete OS images in the early days, the Raspbian project has mostly focused on maintaining a repository of Packages and left the building of OS images up to other people. Some time later the Raspberry Pi foundation started building their own Raspbian images.

Over the years the delta between plain Raspbian and the Raspberry Pi foundation Raspbian images has grown as Raspberry Pi have developed their own desktop environment and have backported a substantial number of graphics related packages in support of their migration from their Pi-specific graphics stack to a Mesa based graphics stack. I have not been particularly happy with the lack of distinction between plain Raspbian and the Raspberry Pi foundation Raspbian images but I also didn’t feel like pressing the issue too hard.


Separately the Pi lineup has been evolving. The original Pi was using ARMv6 CPU, the Pi 2 was using ARMv7. It could run a Debian “armhf” userland and after a while Debian also added support for the Pi 2 in their kernel, though being an “upstream” kernel some things that are supported in the downstream raspberry pi kernels are not supported. The Pi 3 added 64-bit cores, which (after a bit of kernel development) meant Debian “arm64” could now run on the Pi. Then the Pi 4 came along offering up to 4GB of RAM.

Through most of this the Raspberry Pi foundation decided to stick with a single OS image based on Raspbian as their official main OS. They decided that the benefits from multiple OS images did not justify the extra work.


So that brings us forward to April 2020. The 8GB Pi 4 was in alpha testing and Raspberry Pi decided it was finally time to start producing a 64-bit OS image. I got an e-mail from Eben asking my opinion on naming. I expressed that I would not be happy about the name Raspbian being used for an image that did not actually use anything from the Raspbian project. The name Debian wasn’t exactly great either because Debian were building their own images for the Pi.

So Raspberry Pi decided to use the term “Raspberry Pi OS” for all their OS images (32-bit for Pi, 64-bit for Pi and 32-bit for PC) based on Debian or Raspbian.

It was changed to make it easier for users to know it’s the recommended OS for the Raspberry Pi:

Both our 32-bit and 64-bit operating system images have a new name: Raspberry Pi OS. As our community grows, we want to make sure it’s as easy as possible for new users to find our recommended operating system for Raspberry Pi. We think the new name will help more people feel confident in using our computers and our software.

This explains the choice of name, but doesn’t give the full background story behind the change — see plugwash’s answer for that, straight from the source (plugwash is one of Raspbian’s founders).

Further comments there give a little more context, from Simon Long:

It’s just a new name to bring the 32 and 64 bit products under one umbrella. The 32-bit version of Raspberry Pi OS is what was known as Raspbian – the upgrade is just the same as before, apt update / apt full-upgrade. More details in tomorrow’s blog post.

and Eben Upton:

Yes – it’s just an overdue naming change to discriminate between Raspbian (the independent open source project) and the 32-bit images that Raspberry Pi builds on top of it.

The blog post mentioned in Simon’s comment doesn’t explain the change any further, it describes the new features.

Related Solutions

Joining bash arguments into single string with spaces

[*] I believe that this does what you want. It will put all the arguments in one string, separated by spaces, with single quotes around all: str="'$*'" $* produces all the scripts arguments separated by the first character of $IFS which, by default, is a space....

AddTransient, AddScoped and AddSingleton Services Differences

TL;DR Transient objects are always different; a new instance is provided to every controller and every service. Scoped objects are the same within a request, but different across different requests. Singleton objects are the same for every object and every...

How to download package not install it with apt-get command?

Use --download-only: sudo apt-get install --download-only pppoe This will download pppoe and any dependencies you need, and place them in /var/cache/apt/archives. That way a subsequent apt-get install pppoe will be able to complete without any extra downloads....

What defines the maximum size for a command single argument?

Answers Definitely not a bug. The parameter which defines the maximum size for one argument is MAX_ARG_STRLEN. There is no documentation for this parameter other than the comments in binfmts.h: /* * These are the maximum length and maximum number of strings...

Bulk rename, change prefix

I'd say the simplest it to just use the rename command which is common on many Linux distributions. There are two common versions of this command so check its man page to find which one you have: ## rename from Perl (common in Debian systems -- Ubuntu, Mint,...

Output from ls has newlines but displays on a single line. Why?

When you pipe the output, ls acts differently. This fact is hidden away in the info documentation: If standard output is a terminal, the output is in columns (sorted vertically) and control characters are output as question marks; otherwise, the output is...

mv: Move file only if destination does not exist

mv -vn file1 file2. This command will do what you want. You can skip -v if you want. -v makes it verbose - mv will tell you that it moved file if it moves it(useful, since there is possibility that file will not be moved) -n moves only if file2 does not exist....

Is it possible to store and query JSON in SQLite?

SQLite 3.9 introduced a new extension (JSON1) that allows you to easily work with JSON data . Also, it introduced support for indexes on expressions, which (in my understanding) should allow you to define indexes on your JSON data as well. PostgreSQL has some...

Combining tail && journalctl

You could use: journalctl -u service-name -f -f, --follow Show only the most recent journal entries, and continuously print new entries as they are appended to the journal. Here I've added "service-name" to distinguish this answer from others; you substitute...

how can shellshock be exploited over SSH?

One example where this can be exploited is on servers with an authorized_keys forced command. When adding an entry to ~/.ssh/authorized_keys, you can prefix the line with command="foo" to force foo to be run any time that ssh public key is used. With this...

Why doesn’t the tilde (~) expand inside double quotes?

The reason, because inside double quotes, tilde ~ has no special meaning, it's treated as literal. POSIX defines Double-Quotes as: Enclosing characters in double-quotes ( "" ) shall preserve the literal value of all characters within the double-quotes, with the...

What is GNU Info for?

GNU Info was designed to offer documentation that was comprehensive, hyperlinked, and possible to output to multiple formats. Man pages were available, and they were great at providing printed output. However, they were designed such that each man page had a...

Set systemd service to execute after fstab mount

a CIFS network location is mounted via /etc/fstab to /mnt/ on boot-up. No, it is not. Get this right, and the rest falls into place naturally. The mount is handled by a (generated) systemd mount unit that will be named something like mnt-wibble.mount. You can...

Merge two video clips into one, placing them next to each other

To be honest, using the accepted answer resulted in a lot of dropped frames for me. However, using the hstack filter_complex produced perfectly fluid output: ffmpeg -i left.mp4 -i right.mp4 -filter_complex hstack output.mp4 ffmpeg -i input1.mp4 -i input2.mp4...

How portable are /dev/stdin, /dev/stdout and /dev/stderr?

It's been available on Linux back into its prehistory. It is not POSIX, although many actual shells (including AT&T ksh and bash) will simulate it if it's not present in the OS; note that this simulation only works at the shell level (i.e. redirection or...

How can I increase the number of inodes in an ext4 filesystem?

It seems that you have a lot more files than normal expectation. I don't know whether there is a solution to change the inode table size dynamically. I'm afraid that you need to back-up your data, and create new filesystem, and restore your data. To create new...

Why doesn’t cp have a progress bar like wget?

The tradition in unix tools is to display messages only if something goes wrong. I think this is both for design and practical reasons. The design is intended to make it obvious when something goes wrong: you get an error message, and it's not drowned in...